By Motoracer110
Here is all the leaf cuttings from both of my white widow plants. Make sure not to use big fan leaves as you are going to get a lot of contaminants in your hash
I then added cold water and ice to the mix then stirred using the mortar bit non-stop for at least 15 min to get all the THC crystals off the leaf material
Here is what the mix looks like about about 15 min of mixing
I then used a kitchen strainer to get all the leaf material and debris out of the water
This is what the liquid looks like after all the leafs are pulled out
Then you want to let the liquid sit for at least 4 hours without moving it to get all the good stuff to sink to the bottom
I then used a small air hose to siphon out all the water carefully making sure that im not disturbing the bottom layer of liquid
After about 20 min I got down to the bottom layer of liquid then stop siphoning
This is how much liquid I am left with
I then placed the liquid into a jar then let sit for another 4 hours and you can see the hash layer at the bottom of the jar
I then siphoned the water out of the jar making sure not to disturb the bottom crystals
This is what you are then left with
I then placed a baggy on top of another jar then dumped the remaining liquid out into the baggy
I then let the liquid sit for about 1 hour
Then i placed the jar into the oven with a light on top to evaporate the liquid (do not turn on the oven)
Here is what is left over after the water is evaporated
Here is the final product. you can roll it out into a ball or flatten it out
Hopefully this helps anyone with their hash making adventure, enjoy and grow on
