By Nathan76296
First thing is first you need to get a empty PC to grow in. This one I got is 20" tall 9" wide and 20" depth. Then if you dont want to go out and buy Mylar and all that you can used a car windshield reflector , very cheap at walmart and can easily be cut up. As for lights I glued a power strip on the top of the case and plugged the 4 CFL lights into it. Now you're done!
This is all the equipment I used with prices.
PC Case - $43
Hot Glue Gun (Walmart) - $8
Glue Sticks (Walmart) - $3
Car Windshield Reflector (Walmart) - $10
PC Fan's - $15
4 CFL Lights (Walmart) - $20
Power Strip (Walmart) - $5
Remote Control Socket - 15.99

Once you strip it down to nothing it should look like this.

Now its time to start putting reflective material inside. These are the tools I used. (glue gun, car reflect, glue sticks)

After you cut the car reflect up and glue it onto all sides of the case you need to mount the lights. Here 2 pictures showing you where you should put them.


Once you have the lights up you need to get those fans on there. I had to get some metal cutters to make space for mine to fit, but here is where I placed mine.


I take no credit for this guide, it was copied from
http://www.rollitup.org/newbie-central/ ... w-box.html



