a great bong and easy to make
Moderator: Moderators
-
browny
- Why Hello There !
- Posts: 3
- Joined: Wed Mar 14, 2007 8:55 am
- Contact:
a great bong and easy to make
Ok what you will need is:
*A bottle (prefer a gatorade one)
*peice of hose (length determind on the size of bottle)
*cone peice(easly made with a bit or a soft drink can cut to the size of 2 and a half cm in diameter, then cut a slit in it half way, then roll it to make a cone shape, then cut a bit off end to make a hole to suck through.)
*and a litgher
Now to make it
*first you make a hole 1/3 of the way up from bottom the size of the hose.
*the on the other side make a tiny hole the size of a cigerette for the shotty.
*then put the cone peice in the hose.
*then put the hose with the cone peice in the bigger hole.
*then put the weed in the cone piece and put your finger over the shotty and light the weed and suck through the top of the bottle slowly until the weed is lit, then pull hard until it is all gone then take finger off shotty and suck the rest off it.
AND THATS HOW U MAKE AND PULL A BONG.
*A bottle (prefer a gatorade one)
*peice of hose (length determind on the size of bottle)
*cone peice(easly made with a bit or a soft drink can cut to the size of 2 and a half cm in diameter, then cut a slit in it half way, then roll it to make a cone shape, then cut a bit off end to make a hole to suck through.)
*and a litgher
Now to make it
*first you make a hole 1/3 of the way up from bottom the size of the hose.
*the on the other side make a tiny hole the size of a cigerette for the shotty.
*then put the cone peice in the hose.
*then put the hose with the cone peice in the bigger hole.
*then put the weed in the cone piece and put your finger over the shotty and light the weed and suck through the top of the bottle slowly until the weed is lit, then pull hard until it is all gone then take finger off shotty and suck the rest off it.
AND THATS HOW U MAKE AND PULL A BONG.
most people dont even know how to make a bong but i do.
-
captainMorton
- The Duke of Dope

- Posts: 1165
- Joined: Fri Jan 26, 2007 6:47 pm
- Location: brampton on CANADA!!
- Contact:
you dont even need a hose, you put a hole In a coke bottle, put your bowl in the hole(if it has a stem on it, if not then make a stem) then suck out the top of the bottle, much easyer
[img]http://i43.photobucket.com/albums/e387/Shortfingers/captainsigcopy.jpg[/img]
[i][b][size=150][color=green]Who am I to Judge who Struck you down?[/color][/size][/b][/i]
[i][b][size=150][color=green]Who am I to Judge who Struck you down?[/color][/size][/b][/i]
-
jswiz
- Casual toker

- Posts: 19
- Joined: Mon Apr 09, 2007 1:18 am
- Contact:
why youve something to say about everything aint yacaptainMorton wrote:you dont even need a hose, you put a hole In a coke bottle, put your bowl in the hole(if it has a stem on it, if not then make a stem) then suck out the top of the bottle, much easyer
teach us how to make a bong then capt prof hawking
daves not here man
-
captainMorton
- The Duke of Dope

- Posts: 1165
- Joined: Fri Jan 26, 2007 6:47 pm
- Location: brampton on CANADA!!
- Contact:
dude what the fucks your beef with me, just because i like talking about shit dont mean im trying to make you feel inferior to me(even though you are) and if you wanna make a bong heres how you little shit.
step 1, get an acrylic tube(any color), an acrylic sheet, some silicon glue(at least im pretty sure), a drill and bit that are just a bit bigger than your stem, a bowl (with stem), and some rubber or plastic rings that fit your chosen tube size, and the hole from the bit(and fine sandpaper if you want really clean edges.
step 2, cut the tube to desierd length and angle
step 3, glue tube to sheet with glue(i figured you wouldnt understand what im talking about) so you have a water-tight seal all the way around the base
step 4, drill a hole into the tube (wherever you want to put the bowl) and insert the rubber ring into the hole so you will get an airtight seal from the bowl
step 5, put rubber ring on the top of your tube so your mouth is not grinding against hard acryillic
step 6, insert bowl, fill with water and put weed in the bowl and light
the end
there you stupid little worm go make that bong then come back and bitch some more, and ive got somthing to say about everthing?
step 1, get an acrylic tube(any color), an acrylic sheet, some silicon glue(at least im pretty sure), a drill and bit that are just a bit bigger than your stem, a bowl (with stem), and some rubber or plastic rings that fit your chosen tube size, and the hole from the bit(and fine sandpaper if you want really clean edges.
step 2, cut the tube to desierd length and angle
step 3, glue tube to sheet with glue(i figured you wouldnt understand what im talking about) so you have a water-tight seal all the way around the base
step 4, drill a hole into the tube (wherever you want to put the bowl) and insert the rubber ring into the hole so you will get an airtight seal from the bowl
step 5, put rubber ring on the top of your tube so your mouth is not grinding against hard acryillic
step 6, insert bowl, fill with water and put weed in the bowl and light
the end
there you stupid little worm go make that bong then come back and bitch some more, and ive got somthing to say about everthing?
so go fuck yourselfj-swiz wrote: yea the cops ps buy a real bong you cheapskate
shite
why youve something to say about everything aint ya
teach us how to make a bong then capt prof hawking
Use a glass bottle plastic tastes shit and use a socket as your bowl
WELL aint you a regular john rambo ,,, pipes are shit
how stoned were you
[img]http://i43.photobucket.com/albums/e387/Shortfingers/captainsigcopy.jpg[/img]
[i][b][size=150][color=green]Who am I to Judge who Struck you down?[/color][/size][/b][/i]
[i][b][size=150][color=green]Who am I to Judge who Struck you down?[/color][/size][/b][/i]
-
SpRi7e
- Ganja God

- Posts: 5208
- Joined: Sun Sep 17, 2006 5:48 am
- Contact:
-
captainMorton
- The Duke of Dope

- Posts: 1165
- Joined: Fri Jan 26, 2007 6:47 pm
- Location: brampton on CANADA!!
- Contact:
-
jswiz
- Casual toker

- Posts: 19
- Joined: Mon Apr 09, 2007 1:18 am
- Contact:
[quote="captainMorton"]dude what the fucks your beef with me, just because i like talking about shit dont mean im trying to make you feel inferior to me(even though you are) and if you wanna make a bong heres how you little shit.
step 1, get an acrylic tube(any color), an acrylic sheet, some silicon glue(at least im pretty sure), a drill and bit that are just a bit bigger than your stem, a bowl (with stem), and some rubber or plastic rings that fit your chosen tube size, and the hole from the bit(and fine sandpaper if you want really clean edges.
step 2, cut the tube to desierd length and angle
step 3, glue tube to sheet with glue(i figured you wouldnt understand what im talking about) so you have a water-tight seal all the way around the base
step 4, drill a hole into the tube (wherever you want to put the bowl) and insert the rubber ring into the hole so you will get an airtight seal from the bowl
step 5, put rubber ring on the top of your tube so your mouth is not grinding against hard acryillic
step 6, insert bowl, fill with water and put weed in the bowl and light
the end
there you stupid little worm go make that bong then come back and bitch some more, and ive got somthing to say about everthing? [quote]
prof hoser hawking
trust me i aint little and judging by your posts i think the term worm applies to you bud .. wait scratch that maggot is much more appropriate aint folk like you supposed to buy a big sports car to compensate (in your mind) oh and also i gave up making bongs and pipes n shit when i was like 18 appart from a dangerbottle and thats because no bong can match it for power do you even grow weed what ever the fuck you think you know i know more and i need no advice from you
you started it cap , watch your attitude and shit like this dont happen
kiss my hairy ass you pee on ... swiz
step 1, get an acrylic tube(any color), an acrylic sheet, some silicon glue(at least im pretty sure), a drill and bit that are just a bit bigger than your stem, a bowl (with stem), and some rubber or plastic rings that fit your chosen tube size, and the hole from the bit(and fine sandpaper if you want really clean edges.
step 2, cut the tube to desierd length and angle
step 3, glue tube to sheet with glue(i figured you wouldnt understand what im talking about) so you have a water-tight seal all the way around the base
step 4, drill a hole into the tube (wherever you want to put the bowl) and insert the rubber ring into the hole so you will get an airtight seal from the bowl
step 5, put rubber ring on the top of your tube so your mouth is not grinding against hard acryillic
step 6, insert bowl, fill with water and put weed in the bowl and light
the end
there you stupid little worm go make that bong then come back and bitch some more, and ive got somthing to say about everthing? [quote]
prof hoser hawking
trust me i aint little and judging by your posts i think the term worm applies to you bud .. wait scratch that maggot is much more appropriate aint folk like you supposed to buy a big sports car to compensate (in your mind) oh and also i gave up making bongs and pipes n shit when i was like 18 appart from a dangerbottle and thats because no bong can match it for power do you even grow weed what ever the fuck you think you know i know more and i need no advice from you
you started it cap , watch your attitude and shit like this dont happen
kiss my hairy ass you pee on ... swiz
daves not here man
-
captainMorton
- The Duke of Dope

- Posts: 1165
- Joined: Fri Jan 26, 2007 6:47 pm
- Location: brampton on CANADA!!
- Contact:
first off, please go back and quote me where I "start this".
secondly, if you dont need advice, then why did you ask me to tell you how to make a bong?
thirdly, i dont belive I ever said anyhting about your shlong, so i guess your just feeling really really insecure about yourself.
next, making bongs and pipes out of coke bottles and shit is kind of weak, but if you make your own bong(or pipe) with high-grade materials that will last you for a couple years, that works great, and looks fucking awsome, well then store-bought dont have nothing on them.
futhermore, you dont know shit about me, so how can you say "aint folk like you supposed to buy a big sports car to compensate" dont talk shit about sombody you dont know(although im kinda procrastinating)
and finally, some of the shit you say doesnt even make sense, for example: "aint folk like you supposed to buy a big sports car to compensate (in your mind)"
well i guess that could make sense, but really thats just really bad grammer, and then you say "kiss my hairy ass you pee on"
so as far as i can tell you are either asking me to urinate on your ass, or you are calling me a peon, which is a person with little athuority, like a grunt, or "the expendables" so seeing as you just signed up, that would make you the peon, not me (or you at least have less athourity than me)
if you are trying to insult sombody, you really ought to make sure you spell your "bad word" right (even though peon isnt much of an insult)
oh yeah, the whole "No you are!" comeback is really lame, you sure your 18+? maby your just a retarded 10 yearold who found this site because you want people on the internet to think your cool, and if thats the case, you are failing.
thank you, come again
secondly, if you dont need advice, then why did you ask me to tell you how to make a bong?
thirdly, i dont belive I ever said anyhting about your shlong, so i guess your just feeling really really insecure about yourself.
next, making bongs and pipes out of coke bottles and shit is kind of weak, but if you make your own bong(or pipe) with high-grade materials that will last you for a couple years, that works great, and looks fucking awsome, well then store-bought dont have nothing on them.
futhermore, you dont know shit about me, so how can you say "aint folk like you supposed to buy a big sports car to compensate" dont talk shit about sombody you dont know(although im kinda procrastinating)
and finally, some of the shit you say doesnt even make sense, for example: "aint folk like you supposed to buy a big sports car to compensate (in your mind)"
well i guess that could make sense, but really thats just really bad grammer, and then you say "kiss my hairy ass you pee on"
so as far as i can tell you are either asking me to urinate on your ass, or you are calling me a peon, which is a person with little athuority, like a grunt, or "the expendables" so seeing as you just signed up, that would make you the peon, not me (or you at least have less athourity than me)
if you are trying to insult sombody, you really ought to make sure you spell your "bad word" right (even though peon isnt much of an insult)
oh yeah, the whole "No you are!" comeback is really lame, you sure your 18+? maby your just a retarded 10 yearold who found this site because you want people on the internet to think your cool, and if thats the case, you are failing.
thank you, come again
[img]http://i43.photobucket.com/albums/e387/Shortfingers/captainsigcopy.jpg[/img]
[i][b][size=150][color=green]Who am I to Judge who Struck you down?[/color][/size][/b][/i]
[i][b][size=150][color=green]Who am I to Judge who Struck you down?[/color][/size][/b][/i]
-
Ikku
- Sir Toke-a-lot

- Posts: 2687
- Joined: Fri Feb 04, 2005 2:12 am
- Contact:
-
DankNug21
- Casual toker

- Posts: 9
- Joined: Sun Apr 29, 2007 12:58 am
- Contact:
-
Ikku
- Sir Toke-a-lot

- Posts: 2687
- Joined: Fri Feb 04, 2005 2:12 am
- Contact:
-
UnoTech
- Casual toker

- Posts: 26
- Joined: Thu May 19, 2005 11:14 pm
- Contact:
Morton wins. He also knows what hes talking about. Now, I hardly post at all, but im here everyday and Morton definatly is not stupid about smoking lol. So he wins.
[img]http://img208.imageshack.us/img208/3261/trippehju1.th.png[/img]
I Smoke Two Joints in Time of Peace, and in a Time of War. I Smoke Two Joints Before I Smoke Two Joins, and Then I Smoke Two More
I Smoke Two Joints in Time of Peace, and in a Time of War. I Smoke Two Joints Before I Smoke Two Joins, and Then I Smoke Two More
-
Ras Bongo
- Bonghead

- Posts: 215
- Joined: Wed Aug 02, 2006 2:46 am
- Location: South FL
- Contact:
-
browny
- Why Hello There !
- Posts: 3
- Joined: Wed Mar 14, 2007 8:55 am
- Contact:
no one knows wat theyu are talkin bout
u all think u know how to make a bong
first its called a cone peice not a bowl u chop the weed in a bowl u fuks.
secong plastic bongs last along time mate n who cares how it looks u just smoke out of it not have sex wit it dik head
so fuk stop thinkin u are all good mates aussie's know how to smoke bongs and yanky's and pommy's dont
AUSSIE PRIDE.
first its called a cone peice not a bowl u chop the weed in a bowl u fuks.
secong plastic bongs last along time mate n who cares how it looks u just smoke out of it not have sex wit it dik head
so fuk stop thinkin u are all good mates aussie's know how to smoke bongs and yanky's and pommy's dont
AUSSIE PRIDE.
most people dont even know how to make a bong but i do.
-
browny
- Why Hello There !
- Posts: 3
- Joined: Wed Mar 14, 2007 8:55 am
- Contact:
Who is online
Users browsing this forum: No registered users