Page 1 of 2

Packing a bowl

Posted: Sun Feb 25, 2007 5:46 pm
by stonedross
I have this pipe with about a 1cm in diameter hole where the smoke is pulled through but the problem is that whenever I try to pack it the weed falls through into the pipe and it sucks. I have heard of using a nugget but when I asked my friend he told me that'd be wasting weed, and it's really hard to get around here, so I'm not quite sure what to do.

Posted: Sun Feb 25, 2007 6:17 pm
by Vinyl
either dont break up your weed, and use a nugget. or get a pipe screen, go to your local headshop and pick some up theyre like 5 for a dollar. or if you dont ahve a headshop you can find screens in your house, like the little screen at the end of your faucet.

Posted: Sun Feb 25, 2007 9:13 pm
by 219
Vinyl wrote:either dont break up your weed, and use a nugget. or get a pipe screen, go to your local headshop and pick some up theyre like 5 for a dollar. or if you dont ahve a headshop you can find screens in your house, like the little screen at the end of your faucet.
I wouldn't recommend smoking that. Either pack nugs or pack some bigger and tighter bowls. The only time I used a screen was when I got my first piece and it came with one, but I blew it out with the bowl and lost it.

Posted: Sun Feb 25, 2007 11:59 pm
by Vinyl
a proper pipe screen wont hurt you at all. a cheap screen that isnt meant to be smoked throuugh will most likely give off some kind of bad fumes but barely anything. your best bet is to buy a pipe screen. any pipoe with a hole that 1cm should be usuing a screen. the hole in my pipe is only about 4mm and sometimes i wish i has a screen. :roll:

Posted: Mon Feb 26, 2007 12:53 am
by Certified-Nutter
pipe screens are essential for pipes i believe, i have a fair sized collection of pipes, n i use a screen with all of them

Re: Packing a bowl

Posted: Mon Feb 26, 2007 1:50 am
by fkn_eh
stonedross wrote: I have heard of using a nugget but when I asked my friend he told me that'd be wasting weed, and it's really hard to get around here, so I'm not quite sure what to do.
Nugs are hard to get?

On another note just pack your bowls real tight, or roll.

Posted: Mon Feb 26, 2007 3:22 am
by dutchmasta
I place a big piece at the bottom then fill the bowl up with smaller pieces works well for me

Posted: Mon Feb 26, 2007 6:07 am
by blazedsubaru
dutchmasta wrote:I place a big piece at the bottom then fill the bowl up with smaller pieces works well for me
Yep. I start with a small nug then put the small bits on top.

Posted: Mon Feb 26, 2007 9:20 pm
by The.Truth
Vinyl wrote:you can find screens in your house, like the little screen at the end of your faucet.
This is really bad advice NEVER do this.


Pipe screens are sold at corner stores, if for whatever reason you can't find any, or can't dig up 99 cents just roll a joint, or don't smoke the weed. Simple.

Posted: Tue Feb 27, 2007 1:40 am
by Weedguru_Falkon
Eh... chances are the screen in your faucet is made of the same or nearly the same material as a smoking screen. As long as its not brass i dont believe it should inflict any harm... Though i could be wrong

But how is the hole in your pipe 1 cm? thats fuckin massive! even 4mm is huge. The pipes i own, the largest hole is maybe 2.5mm. I dont have any problems with it.

But in case you are really concerned about using screens (in terms of health related issues( they have glass screens that are pretty damn cool. I had one with one of my pipes but when i got fucked up at a party i lost it somehow. Im not surprised though. I had the weed and the paraphenalia for the 15 or so people there. Oh well. They look cool too :)

Posted: Tue Feb 27, 2007 5:00 am
by m3tal
The faucet screens work really well. They're steel and thats the best way to go in terms of screens.

Posted: Tue Feb 27, 2007 12:32 pm
by (weedguru)scarf
blazedsubaru wrote:
dutchmasta wrote:I place a big piece at the bottom then fill the bowl up with smaller pieces works well for me
Yep. I start with a small nug then put the small bits on top.

yep this works for me...
i have a fair collection of pipes... never had to use a screen

Posted: Mon Mar 26, 2007 4:29 am
by Kjm420
yeah 1 cm is HUGE i cant imagine that, mines like 1/3rd of 1cm

Posted: Mon Mar 26, 2007 4:47 am
by SladeHino
If your screen doesn't go on there right, like it wouldn't on mine, i kinda folded mine a little, and put it down into the bowl.but i can tweezers it out if need be. It helps alot, i also plan to do that so i keep pulled through bud.

Posted: Fri Mar 30, 2007 7:44 am
by JokerTheTokerr
Iv been desperate once or twice and have made a screen out of tin foil.. pretty sure its harmless becuase most people have used tinfoil pipes before.!

just fit it in your pipe and poke some holes with a small needle :D