..::Better Idea for Bong::..
Posted: Tue Sep 12, 2006 12:14 am
Ok, first of all I live in Tuscaloosa, AL and I know a lot of people from up north that have never seen nor heard of this when I pulled it out. I know that other people know of what I am about to describe, but it wasn't listed anywhere on the site so I figured I would post it because it's better than the other ones anyways. But mainly because I'm blazed and on Adderall.
Gravity Bong
You Need:
1. A plastic bottle (preferably a 2 liter)
2. Small socket. 3/4" is the best, but you can use any of the small ones as long as the base is more narrow than the top.
3. Knife
Instructions:
1. Take the knife and cut a small hole into the top of the bottle cap. You want to cut the hole a little bit smaller than the size of the socket so that you are able to shove it into the hole and it still be air tight. If you want to really make sure that it is air tight, I have used a rubber based temperature resistant sealant that you can find at any local auto parts store.
2. Take the bottle and burn 3-5 holes into the bottom of it.
3. Submurge the bottle into water. A sink, or cooler, or whatever you want.
4. Fill the socket with pot and screw it to the top of the bottle.
5. Light the pot as you slowly pull the bottle up out of the water.
6. Screw the top off and suck as hard as you can as you quickly pull the bottle up out the water.
7. Cough
8. You're high.
(please...by all means, repeat if neccessary)
Gravity Bong
You Need:
1. A plastic bottle (preferably a 2 liter)
2. Small socket. 3/4" is the best, but you can use any of the small ones as long as the base is more narrow than the top.
3. Knife
Instructions:
1. Take the knife and cut a small hole into the top of the bottle cap. You want to cut the hole a little bit smaller than the size of the socket so that you are able to shove it into the hole and it still be air tight. If you want to really make sure that it is air tight, I have used a rubber based temperature resistant sealant that you can find at any local auto parts store.
2. Take the bottle and burn 3-5 holes into the bottom of it.
3. Submurge the bottle into water. A sink, or cooler, or whatever you want.
4. Fill the socket with pot and screw it to the top of the bottle.
5. Light the pot as you slowly pull the bottle up out of the water.
6. Screw the top off and suck as hard as you can as you quickly pull the bottle up out the water.
7. Cough
8. You're high.
(please...by all means, repeat if neccessary)
