Page 1 of 7

Make A Lightbulb Vaporizer

Posted: Tue Sep 13, 2005 3:20 am
by imscaredofgrass
Vaporizers are possibly the best things to smoke out of, and is the most recommended methods of smoking for medical marijuana. Its much safer on your lungs, since you dont combus the molecules, causing the release of more carcinoges, gets rid of much tar, and doesnt make you choke. Also, it allows more THC to be inhaled, since instead of incenerating much of it, you just release it to the air.

First off, I would like to thank Goosie for the idea. His is the most common and simplistic.

Materials:
Light bulb
Bottle Cap (size depends on size of light bulb...)
Knife
Straw
Tape (Electrical is best)

Procedure:

1) First, take the light bulb and your knife. Cut off the top of the metal part of the light bulb with the knife (or saw i guess... just be EXTREMLY CAREFUL! seriously... i dont want people getting cut badly because of my tutorial! take your time and do it slowly and carefully)

Image


2) When you have that metal part cut off, then empty out the inside. Take out the metal stuff inside that makes the lightbulb make light... when your done the inside should be cleaned out. Using plyers helps since most of the peices are aluminum (i think...) and just bend really easly to fall out.
Also be sure to clean out the bulb completly with soap and water, and let fully dry. and be careful as bulbs are quite fragile!

Image

3) Now find a bottle cap (mostly 2 liter coke-bottle caps work... they have on all the bulbs ive tried so far...) and screw it onto the light bulb (thats why you left some of the metal there ) to see if it fits. if it doesnt, look for a diffrent sized cap.

Image

4) Now take your cap off and make 2 holes in it. 1 just big enough to fit a staw through, and the other slightly smaller. These are your inhalation holes, and your clearing hole. the smaller one is to cover with your finger to keep the smoke from excaping. the one with the straw is to inhale

Image

5) Now to put in the straw to complete your vaporizer! put the straw into the larger hole

Image

6) To use:
unscrew the top, and put your weed in (i break mine up, but thats just me...). Cover the smaller hole and put your mouth on the straw (dont inhale) and put the bulb over a tea-candle or use your lighter under the bulb. the bulb will fill with white smoke. after it does that, uncover the small hole and inhale through the straw. makes weed last longer and gets ya pretty damned high hope someone finds this useful on one of those days with nothing to smoke with... takes aprx 15 minutes to build.

source:
http://www.planetskunk.com/cannabis4261.html

Posted: Sat Sep 17, 2005 5:15 am
by Satanus0
i almost love you cause i dont think i can find one of those around n i couldnt find a site that actually explained the procedure

Posted: Sun Sep 18, 2005 2:08 am
by imscaredofgrass
i just tested it and it works perfectly! one this i found out though is raise the straw a bit when lighting or it will melt :o

Posted: Sun Sep 18, 2005 2:18 am
by Satanus0
sweet i just made one n i need to dry it

i got done smokin at 1130East. sum then tried the vap.its works well bringin the high up but i wont know how good it is until i try it sober...i had my shit in my pipe all ready for the morning

Posted: Sun Sep 25, 2005 3:37 pm
by paradox
ok try this!
get a lung and make a bottle cap with a small hole for a straw and use the straw from the vaporizer in it so that you connect the two. then as you heat up the vaporizer pull the bag back in the lung :D fun fun fun

Posted: Sun Oct 02, 2005 4:48 pm
by imscaredofgrass
thats a pretty dam good idea! the only problem is getting the straw, to be completely airtight, along with joing the two devices

Posted: Mon Oct 03, 2005 3:18 am
by kevinvinvin
shiet im gonna go try that

Posted: Wed Oct 12, 2005 5:03 am
by Gorecore
I want to try this as well!!

How the heck do you cut the metal part of a lightbulb? A hacksaw would work great...but I don't know if I have one here.

Looks like a good method. I don't know if it was explained in the tutorial, but I heard somewhere to make these with clean bulbs only. The frosted white kind will burn off along with your weed and is probably dangerous to inhale.

Posted: Wed Oct 12, 2005 10:24 pm
by imscaredofgrass
the frosted ones are just glass bulbs coated with this dust stuff that comes off instantly with water. Id run it through the dishwasher b4 smoing outta it first, though it probrably is best to use a clear one to start out with.

And to cut out the bottom, just use a steak knife.

Posted: Sat Oct 15, 2005 9:12 pm
by wildcard
theres this yellow shit in the bulb looks like chemical crap is that alright to leave in?

Posted: Wed Oct 19, 2005 6:01 pm
by do_you_accept_change?
I'd take it out, I think it is from when you cut the top off. Just use the straw to blow it out.

Posted: Fri Nov 11, 2005 8:34 pm
by KaliCoe
im trying that 2nite after my football game
hopefully after i use it i'll look something like this--- :shock:
yup, im a football player/stoner, i got iron lungs

Posted: Wed Nov 16, 2005 9:00 am
by Weedguru_RyaNayR
How is this different then smoking weed normally? When I did it with tobacco it just started burning and turned to ash... :?

It did feel like shit and taste like shit when I inhaled it though.

Posted: Thu Nov 17, 2005 9:59 am
by Duke Raoul
^
why would you put tobacco in a vaporizer? the purpose of a vaporiser is not to burn the stuff, but instead evaporating THC without alot other stuff bad for your lungs.


@imscaredofgrass: This is great idea! I'm probably gonna make one today and see how it works...

and ppl, better use new bulbs then filthy ones, they're cheeper than a candy, lol

Posted: Sat Nov 19, 2005 11:10 pm
by Weedguru_RyaNayR
OK I get how it works now. I'm guessing the reason it tasted like shit is because of all the damn chemicals in tobacco lol.

Only problem is that I can't make it right with out busting it...

Here's what I find inside of all my bulbs:

Image