Page 1 of 1

Hey everyone...

Posted: Mon Jun 13, 2005 7:02 pm
by SilentBob420
I am not really new to gettin stoned but I haven't been getting stoned for long yet.

I got a question however, I have always smoked with a buddy and he always was the one who always handled the weed and all that shit. Now, I am on my own for right now.

So my questions are, what do you do with your stuff right after you get it, when you are preparing to smoke it, to get rid of the stems and seeds.

Plus, when I have no wraps, pipes, or bongs and all I have are empty 20 oz. pop bottles, what do I do now :?:

Posted: Mon Jun 13, 2005 7:10 pm
by canadianbud
First of all
SilentBob420 wrote:I am not really new to gettin stoned but I haven't been getting stoned for long yet.
What??

As for your question. After you buy weed, you go home, and smoke it. If you're guna smoke it later, stash it somewhere. Make sure you leave it in the plastic bag, preferably somehwere dry and dark. You're going to have to rip it up somehow, with a grinder, with scissors, or with your hands. Then, you check for any seeds (there should not be any) and stems (maybe a few). Take them and throw them away.

As for yourlast question, there a few ways. I'd suggest just buying a pipe or bong or papers, but if not, there are forums that will help you build your own bong, i'd suggest checking out the pipe or bong sections for advice for homemade shit.

Well im baked and ive been rambling, hope all that makes sense.

Re: Hey everyone...

Posted: Mon Jun 13, 2005 8:10 pm
by BGDetroit
SilentBob420 wrote:.

Plus, when I have no wraps, pipes, or bongs and all I have are empty 20 oz. pop bottles, what do I do now :?:
Weedguru Higher wrote:How to Make Your Own Bong

Note: There are many different ways to make a bong, this is just a few of them. They are designs i have collected on the net, and ones sent in by the members...if you have any new ideas, email them to keithdag@aol.com

Basic "Bottle Bong"



Supplies:

1. A 20oz Pop Bottle(this is the chamber)
2. A marker(this is the shaft)
3. A socket wrench head(this is the bowl)
4. A sharp knife or razor blade(this is for the cutting you need to do)
5. Silicon or glue(this is for sealing up the cracks and making the bong as air tight as possible)
6. Clay or something to be used as a stand(this is purely optional and only if the bong won't stand on it's own)
7. A screen or tin foil(this is for the screen)

Procedure:

1. First off you want to strip the label off of the 20oz Pop Bottle. Next wash out the 20oz Pop Bottle to make sure it's clean. After that, you can get rid of the cap, because it is not needed.
2. Next, open the marker and get rid of the inside, cap, and cut the front and back off with the kinfe.
3. Third, put the socket wrench head on one side of the marker. Then use the silicon or glue to seal up the openings around the bottom side of the socket wrench head. Note: Hot glue is not a good thing to use, because it tends to melt when the bowl gets really hot.
4. After that, use the knife to make a small hole somewhere on the back of the 20oz Pop Bottle. This will be your carb. Make sure the carb is above where the bowl will be, and on the opposite side.
5. Next, use the knife to make a bigger hole, or slit, on the opposite side of the carb for the marker to fit into. Don't make this hole too big, because you want the marker to be held steadily into place.
6. Sixth, use the silicon or glue to seal up around the marker. This is to both hold the marker in place, and seal up the holes that may be around the marker.
7. Now, cut the screen or tinfoil to the right size and fit it inside the bowl. Note: DO NOT use any silicon or glue to hold it into place. Also, if you are using tinfoil you will need to poke many small holes in it.
8. Next, see if your bong stands up by itself. If it does then you are finished. If it don't then you got one more step to go.
9. (Optional)Take your clay, or whatever you are using for a stand, and fit it around the base of the bong. Then mold it so that it either looks good or holds the bong up, which ever you prefer. Let the clay dry and you are now finished.
Anymore questions you have feel free to ask. Welcome to the board BTW homie, How long have you been smoking exactly?

Posted: Mon Jun 13, 2005 8:13 pm
by BGDetroit
Also, Ill mention a couple other variations.

You can also take aluminum foil, fold it around the cap of a white out bottle and that's the shape of your bowl, Attach it to the top of a bottle where you drink from. Take a pin and poke tiny holes in it for air to get through it. Then make a hole in the side near the top. You'll take your hit thru that, LIght at the top.

Another one you can do. Is make the same kinda bowl i mentioned above, Take a paper towel or toilet paper roll. Cut a whole in it in the middle somewhere big enough for the aluminum foil to sit in. Make sure tis in there good. Then put one end to your mouth to inhale, Use one hand to cover the other side of the roll, Then light at the bowl.

Posted: Mon Jun 13, 2005 9:02 pm
by MOT
A lung!! Not much help without details but have a browse around with the search button!

Posted: Mon Jun 13, 2005 9:18 pm
by WeedGuru_Flow
you take a quantity of the weed in your handpalm, use your other hand to break it up into small bits, just pluck out the stems while your at it.

You can buy a grinder, that'll ease the breaking up... then just mix it with baccy if you do that, or just roll it pure .

have fun!