Page 3 of 7

Posted: Sun Jan 01, 2006 9:21 pm
by ScareCrowMan
I just made one, but is it necessary to clean out the brown crap inside of the metal part of the bulb?

Man, I can't wait to try it.

Posted: Sun Jan 01, 2006 9:26 pm
by Khronic
I would clean it properly with warm water and soap so that you dont inhale any chemical shit

Posted: Mon Jan 02, 2006 12:12 am
by Dr. Greenthumb
soap isnt good for cleaning pipes, 420cleaner is the best

Posted: Mon Jan 02, 2006 3:16 am
by ScareCrowMan
One more question: has anyone had a problem with the glass breaking? I'm trying to get my friend to try this thing out with me but he's convinced the glass will explode from the heat.

Posted: Mon Jan 02, 2006 5:08 am
by 18C
ScareCrowMan wrote:One more question: has anyone had a problem with the glass breaking? I'm trying to get my friend to try this thing out with me but he's convinced the glass will explode from the heat.
AHHAAHAHAHA! Ever touch a light bulb when it's on? It's EXTREMEMLY hot, so I wouldn't worry about it breaking unless you squeeze it really hard or something.

Posted: Mon Jan 16, 2006 7:58 pm
by paradox
aobut it breaking....so far I've made 3...the first one my friend brought to school andafter smoking out of it a bit this other guy ralph...he tapped it gently with a lighter to get the half burned pot in a centralized pile and the bottom fell off the vaporizer, the 2nd one I forgot in someones car..and the 3rd one we were trying to empty to put more in and we were being very careful and it just shattered... so they are I repet ARE very breakable and don't tap them anywhere while hot...also don't run hot glass under cold water I am sure someones seen that chef tony commercial where they put a cold glass dish on a hot baking pan right out of the oven well the same thing happens here

Posted: Thu Feb 09, 2006 9:35 am
by Wooden Foot
I think it look s cool and the concept is great but I think Ill wait till i can afford an electric vapo...

Posted: Thu Feb 16, 2006 6:10 am
by andymac63220
with this is there no smell like with an electric vapo?

and for anyone thats used it how do you rate your high, like from 1 to 10, or compared to other ways of smoking (and i know this isnt really smoking, but you know what i mean)?

Posted: Tue Feb 28, 2006 12:44 am
by bong man
Well i just made one and i put the weed in it and was lighting it and it cracked .

This is a fucking ideotic nonsense of an idea

Posted: Wed Mar 01, 2006 5:58 pm
by thesouljams
Its shit. Even the description is contradictory, one element to consider when using a vaporizer is that no smoke at all should be produced. If anything you should see a condensation or very light steam. I tried making one of these (I knew it was a shit idea, I just wanted to make sure)and cleaned it too perfection. The glass on a lightbulb (like the one suggested in this thread) is far too thin. Causing the weed to heat up too much too fast, causing it to combust. Also alot of people wont have the patience to wash out all of the chemicals, all of which are very harmful in lightbulbs. ITs a fucking nutters idea, an idea which I would suggest is unfit for a 13 year old chav called lisa anne marie brittany platinum smith, from Welwyn Garden City.
Save up and buy an electronic vaporiser.

OR

a generally better (but still clearly flawed) design for a homemade is:

1. Get a pringles can/container. Cut off the bottom 4inches/10cm or so (with the metal base). Make an air release hole in it for your thumb (or some blocking device), to go over when heating the weed.

2. Get a bottle and chop the bottom off, keep the top bit (not too big, about 15cm/6inch in height) and stick it on the top of the pringles can/container, making sure its completely airtight (this is a point I cannot stress enough)

I find a robinsons cordial bottle is the only one which fits perfectly. If you live somewhere where this is unavailable just search for something which does fit.

3. Put weed on the metal bit on the inside. Heat with a candle, from a distance of about 5-7cm/2-3inches. for about half an hour. then release the air hole and toke in. There should be a light vapour, a very strong taste, and a quick high. The weed should not appear burnt (makbye a bit singed or a different colour) after (you can smoke it in spliff but, if the vaporiser worked properly, it shouldnt produce a high)

TO THE PERSON WHO CREATED THIS THREAD, PLEASE CONSIDER THE IDEA WHICH YOU HAVE SUGGESTED AGAIN. TRY THIS, ITS MUCH HEALTHIER.

p.s. the longer you heat the weed for the better, be patient and dont get over exited and burn the weed, otherwise its just a shit, slow pipe.

The Souljams

xxx

Posted: Sat Mar 11, 2006 8:59 am
by Copp_A_Squat
Weedguru DrGreenthumb wrote:soap isnt good for cleaning pipes, 420cleaner is the best
I like to use mouthwash for anything I smoke with...

It cleans really well, makes what your cleaning taste minty, everyones got it and you know its not that bad for you

Posted: Tue Mar 14, 2006 3:58 am
by adinolfi420
.....

Posted: Tue Mar 28, 2006 3:04 pm
by Scooby_Laylow
no ex twacks in here? haha


all you do is fill the bulb half way with table salt and shake it around a few times - it acts as a solvent and gets rid of all that white powder shit. :twisted:

Posted: Wed Mar 29, 2006 6:17 pm
by blazed4dayz
Isnt there the chance of the bulb shattering when you put a flame to it...man would that be a bummer, getting all sliced up trying to toke...

Posted: Wed Mar 29, 2006 6:53 pm
by Dr. Greenthumb
light bulbs are resistant to heat