Page 2 of 2
Posted: Fri Aug 24, 2007 9:11 pm
by Ikku
I got this stuff called Formula 420 from my headshop, it works amazingly.
Posted: Sat Aug 25, 2007 3:35 am
by swanee89
^that kind of stuff is always like overpriced windex or some shit. if you got a bottle handy read the label and let us in on the active ingerdients
Posted: Sat Aug 25, 2007 4:54 am
by Ikku
It's definitely not windex, half of the bottle is liquid and half of it is crystals, they basically scrub the inside of the pipe and the resin just washes out.
Posted: Sat Aug 25, 2007 6:57 am
by king
if you use water to clean out ya pipe is there a chance of mold forming in the inside when ya let it dry out? cause i just cleaned mines out with hot water and used a toothpick to scrape the inside and then also put some salt water in the inside covered all the holes and shook it around...now im just lettin it dry out....i also used a q-tip to scrape the inside once again at the end....my main concern is mold..
Posted: Sat Aug 25, 2007 12:42 pm
by Gorecore
Hey King. I wouldn't worry about mold forming in your pipe.
As for cleaning my glass pipe, I do it two different ways depending on how much time and effort I want to put into it.
One method I use is dropping it in a used butter container with a lid and pouring in enough rubbing alcohol to cover the pipe holes. I let it sit nearby and give the container a few light shakes every half hour. I've let the pipe sit in that bath overnight but leaving it in for an hour or two usually does the trick. Then I delicately hold it under the scalding hot running tap water and rinse the shit out of that bitch! That's when most of the resin, tar, and ash falls out into the sink. Let dry for a bit and then it's good to go.
The other method was already mentioned with heating the resin in the bowl and scraping it out. I usually follow up with using a twist tie cleaning in through the carb hole on the side. The paper/plastic edges of the twist tie really help gather the sludge from the walls of the bowl and stem.
I've heard that pure lemon juice (like the kind used for cooking) mixed with table salt works really well. Has anyone tried that method of cleaning?
Posted: Sat Aug 25, 2007 1:07 pm
by Pura Vida
king wrote:if you use water to clean out ya pipe is there a chance of mold forming in the inside when ya let it dry out? cause i just cleaned mines out with hot water and used a toothpick to scrape the inside and then also put some salt water in the inside covered all the holes and shook it around...now im just lettin it dry out....i also used a q-tip to scrape the inside once again at the end....my main concern is mold..
hmm I never thought of that...is it okay if you dry it right away?
Posted: Sat Aug 25, 2007 4:45 pm
by swanee89
@ ikku: im not saying its windex but you know what i mean. they just repackage something you could get for a loot cheaper and charge you twice the price cause its a "specialty cleaner"
Posted: Sun Aug 26, 2007 10:41 pm
by Ikku
I will take pics next time I use it and you tell me what else it could possibly be used for.

Posted: Mon Aug 27, 2007 12:07 am
by king
damn... cleaning out my pipe was really worth it....it hits soo good.. and Gorecore yea i hope i dont have a mold problem...so far everything seems fine...thanks for the tips
Re: how to clean your pipe?
Posted: Mon Mar 29, 2010 12:56 am
by Weedguru Higher