how to connect 19mm bowl to pvc pipe shaft

[monkeyman22]

SO i got a 19mm socket for a bowl and a pretty thing pvc pipe for the shaft. How should I connect these two? Is there a special glue or clay that wont harm me? thanks

[BGDetroit]

Are you using a Socket for a Socket Wrench as the bowl?

If you are, You prolly shouldnt worry to much about stuff harming you. Those are harming enough. Alot of the metals Sockets are made out of are toxic when you smoke.

[monkeyman22]

i thought using a 19mm socket wrench was a good bowl?

[BGDetroit]

They do work good, Trust me. But alot of the shit is toxic. I still do it, But it can fuck ya up.

[monkeyman22]

is there some type of special glue or clay that i could use?

[BGDetroit]

I dont know how big the pvc thing is but tape works, Jus make sure you seal it nice n good.

You want to, Get a pen that comes apart, So theres no ink it anymore jus the tube, And connect the socekt to the pen, Tape it on, Works fine. Not clear tape but some stickyer like duct tape.

[weedguru tom]

get your socket
add a gauze.

and put about 3 raps of tape around the socket end that will slot into the bottle neck and it will just wedge,

[King Bong]

dont use the pvc pipe because when it gets hot the fumes will kill you

just to let you know

[monkeyman22]

whats a good thing to use for the shaft of the bong then?

[King Bong]

you can buy bong shafts at a hempshop or use any metal tube (except for copper of brass... cant remember which)

[GodHand Kronix]

(Copper)

[limit]

Use a garden hose dude, heres a rough drawing of what to do...i was stoned..shutup

[flynn]

yep, garden hose